547 Big Block Ford Pump Gas Short Block $9,750

Basic Version Shown w/Cam Package

547SBF $9,750

Internally Balanced

Our New 547 Ford Big Block Is Now Available In Short Block Form! Different Compression Ratios Are Available - Look At The Following Chart And Let Us Know What Heads You Are Using And We'll Do The Rest!

Bore & Stroke
Compression Ratio

4.500 x 4.300
See Chart Below

Chamber Vol.	72cc	75cc	85cc	95cc
Flat Top (-5cc)	13.36	12.96	11.81	10.86
Dished (-16cc)	12.02	11.70	10.77	9.99
Dished (-38cc)	10.06	9.85	9.20	8.64
Ratio Computed With .010 Deck & .040" Gasket

Ford Motorsports SVO 10.320" Block w/Splayed 4 Bolt Main Caps (1)
Lunati 4340 4.300" Forged Steel Crank
Molnar 4340 6.750" H-Beam Rods w/ARP 2000 Asymmetrical Bolts
Clevite 77 "H" Series Main & Rod Bearings

Custom JE 10.75-1 2618 Forged Aluminum Pistons
Plasma Moly 1.5/1.5/3.0mm Ring Set
Internally Balanced (2)
Professionally Blueprinted and Assembled

Footnotes:
(1) Block Requires 9/16" Head Bolts or Head Studs.
(2) Neutral Balance Flexplate/Flywheel and Harmonic Balancer Required.

Lifters
Hi-Performance Solid or Hydraulic Roller Lifters. Call For Details.	From	$575
Timing
Supply and Install (2) Piece Fuel Pump Eccentric		$35

Harmonic Balancer
SFI Approved Harmonic Balancer (Required At All Race Tracks)		$150
Lifters
Hi-Performance Solid or Hydraulic Roller Lifters. Call For Details.	From	$575

Pistons - Pins - Rings - Bearings
Total Seal TNT "Hellfire" Rings		$175
Calico Coated Bearing Package		$175
Additional Parts - Labor - Accessories
Cometic Multi Layered Steel Head Gaskets. Round Bore - 1/2" Bolt Holes (.040/.045/.051")	Each	$95
Cometic Multi Layered Steel Head Gaskets. Round Bore - 1/2" Bolt Holes (.060/.066")	Each	$115
ATI SFI Flexplate - Internally Balanced 157 Tooth 10.5" Bolt Pattern		$275
ATI SFI Flexplate - Internally Balanced 164 Tooth 11.5" Bolt Pattern		$275
Steel Billet Flywheel - Internally Balanced 157 Tooth 10.5" Bolt Pattern		$350
Steel Billet Flywheel - Internally Balanced 164 Tooth 11.5" Bolt Pattern		$350
PowerMaster 9603 Hi-Torque Mini Starter. Fits 4.084" block plate with 3/4" depth ring gear.		$229
Lucas Break In Oil. Call For Viscosity Recommendation. Priced Per Quart.	Quart	$8

Have A Question About Any Of Our Engine Packages?

Click or Tap - Our Customer Response Form Will Get You An Answer FAST!!

Scott Shafiroff Racing Enterprises, Inc.

35 A Davinci Drive • Bohemia, NY 11716

800-295-7142 • Local: 631-218-7530 • Fax: 631-218-7540

HOURS: Mon - Thu 9:00 a.m. - 6:00 p.m. Friday 9:00 a.m - 3:00 p.m. EST

Contact Us • Facebook • YouTube • Site Map

Material & Labor Surcharge May Be Applicable To Select Products. Components Subject To Change Due To Availability. Free Freight Applies To All Advertised Items Shipped To A Commercial Address In The 48 States. Residential, Out-Of-Area Or Lift Gate Service Subject To Additional Charges. Insurance & Handling Fees Apply. Credit Card Transactions Are Subject to A 3% processing Fee.