363 Small Block Ford Pump Gas Short Block $6,595

Basic Short w/Cam Package Shown

347/363SBF $6,595

Internally Balanced

A Fully Assembled And Blueprinted 8.2" Deck Short Block To Replace Your Tired Old 302!

347 Bore & Stroke
363 Bore & Stroke
Compression Ratio

4.125 x 3.250
4.125 x 3.400
See Chart Below

Chamber Vol.	58cc	62cc	66cc	72cc
347 Flat (-6cc)	10.5	10.0	9.6	9.0
363 Flat (-6cc)	10.9	10.5	10.0	9.4
363 Dish (-16cc)	9.7	9.4	9.0	8.5
Ratio Computed With .041" Gasket

Dart SHP 8.2" Block w/Splayed 4 Bolt Steel Billet Main Caps (1)
Lunati 4340 3.250"/3.400" Forged Steel Crank
Molnar 4340 5.400" H-Beam Rods w/ARP2000 Bolts
Clevite 77 "H" Series Main & Rod Bearings

Custom Forged Aluminum Pistons
Plasma Moly 1.0/1.0/2.0mm Ring Set
Internally Balanced (2)
Professionally Blueprinted and Assembled

Footnotes:
(1) Block Requires 1/2" Head Bolts or Head Studs.
(2) Neutral Balance Flexplate/Flywheel and Harmonic Balancer Required.

Camshaft Installation Package				$795
*Includes:* UltraStreet Hydraulic Roller Cam, Cloyes Roller Timing Set. Camshaft Installed, Degreed-In and Checked For Proper Stroker Clearance.

Camshafts
525HP or 595HP Cam - Your Choice!		$N/C
Lifters
Hi-Rev High Performance Hydraulic Roller Lifters (Set of 16). Includes Spider.		$395
Hi-Performance Solid or Hydraulic Roller Lifters. Call For Details.	From	$425
Timing
Supply and Install (2) Piece Fuel Pump Eccentric		$35

Deluxe Short Block Version Includes Camshaft Package				$1795
*Includes:* UltraStreet Hydraulic Roller Cam, Cloyes Roller Timing Set w/(2) Piece Fuel Pump Eccentric, OEM Style Front Cover, Hi-Performace Balancer and Billet Pointer, Canton Street & Strip Oil Pan, Melling HP Oil Pump w/Pickup. Completely Assembled With TDC Verified and Set. Must Specify Front or Rear Sump.

Harmonic Balancer
SFI Approved Harmonic Balancer (Required At All Race Tracks)		$150
Camshafts
525HP or 595HP Cam - Your Choice!		$N/C
Lifters
Hi-Rev High Performance Hydraulic Roller Lifters (Set of 16). Includes Spider.		$395
Hi-Performance Solid or Hydraulic Roller Lifters. Call For Details.	From	$425

Connecting Rods
ARP 2000 Rod Bolts		$Included
Pistons - Pins - Rings - Bearings
Total Seal TNT "Hellfire" Rings		$175
Additional Parts - Labor - Accessories
Cometic Multi Layered Steel Head Gaskets. Round Bore - 1/2" Bolt Holes (.040/.045/.051")	Each	$95
Cometic Multi Layered Steel Head Gaskets. Round Bore - 1/2" Bolt Holes (.060/.066")	Each	$115
ATI SFI Flexplate - Internally Balanced 157 Tooth 10.5" Bolt Pattern		$275
ATI SFI Flexplate - Internally Balanced 164 Tooth 11.5" Bolt Pattern		$275
Steel Billet Flywheel - Internally Balanced 157 Tooth 10.5" Bolt Pattern		$350
Steel Billet Flywheel - Internally Balanced 164 Tooth 11.5" Bolt Pattern		$350
PowerMaster 9603 Hi-Torque Mini Starter. Fits 4.084" block plate with 3/4" depth ring gear.		$229
Lucas Break In Oil. Call For Viscosity Recommendation. Priced Per Quart.	Quart	$8

Request For Information Shafiroff Engines

Material & Labor Surcharge May Be Applicable To Select Products. Components Subject To Change Due To Availability. Free Freight Applies To All Advertised Items Shipped To A Commercial Address In The 48 States. Residential, Out-Of-Area Or Lift Gate Service Subject To Additional Charges. Insurance & Handling Fees Apply. Credit Card Transactions Are Subject to A 3% processing Fee.

Small Block Chevy • Big Block Chevy • LS Series • Small Block Ford • Big Block Ford

Toll Free: 800.295.7142 • Phone: 631.218.7530 • FAX: 631.218.7540

Contact Us • Facebook • YouTube • Site Map

Scott Shafiroff Racing Enterprises, Inc.

Chevy Drag Race Engines - Chevy Pump Gas Crate Engines - Ford Drag Race Engines - Ford Pump Gas Crate Engines

Your IP Address : 18.232.56.9