427 Small Block Ford Drag Race Engine
Drag Race Sportsman Series

427 Small Block Ford Drag Race Engine $17,495

427/745HP $17,495
Less Carb & Ignition


It's Been A Well Kept Secret That Scott Shafiroff Has Always Had A Soft Spot For Ford Race Engines Since His Pro Stock Mustang And Comp Eliminator Days. These State Of The Art Precision Crafted Race Engines Are The Result Of That Fondness!

  • Horsepower
  • Torque
  • Bore & Stroke
  • Compression Ratio
  • 745 @ 7000 RPM
  • 610 @ 5800 RPM
  • 4.125 x 4.000
  • 13.5 to 1
  • Dart SHP 9.5" Block w/Splayed 4 Bolt Steel Billet Main Caps
  • Molnar 4340 4.000" Forged Steel Crank w/351 SVO Mains
  • Molnar 4340 H-Beam Rods w/ARP 2000 Asymmetrical Bolts
  • Clevite 77 "H" Series Main & Rod Bearings
  • Custom Diamond 14.5-1 Forged Aluminum Pistons
  • Plasma Moly .043/.043/3.0MM Ring Set
  • SSRE/Comp Cams Solid Roller Steel Billet Camshaft
  • HIPPO Pro Series Roller Lifters w/Hi-Pressure Pin Oiling
  • Cloyes True Roller Timing Set w/Fuel Pump Eccentric
  • AFR Renegade Series 220cc Fully CNC Ported Heads (1)
  • 2.100"/1.570" 8mm Valves
  • PAC Racing 1225 1.550" Roller Springs w/Titanium Retainers & 10° Locks
  • ARP Head Stud Kit
  • Comp Cams 1.6 Ultra Pro Gold Aluminum Roller Rockers
  • Chromemoly (1) Piece .080" Wall Pushrods
  • FelPro HP Head Gaskets w/Pre-Flattened Steel Wire
  • World Man-O-War Dominator Aluminum Intake (2)
  • Canton Sportsman Series Race Pan w/Baffle (3)
  • Melling HP Oil Pump w/Canton Pickup
  • OEM Style Front Cover w/ATI Billet Timing Pointer
  • SFI Approved Harmonic Balancer
  • Complete Assembly Internally Balanced (4)
  • Individually Dyno Tested & Tuned
  • Actual Dyno Sheet Provided
  • Footnotes:
  • (1) Exhaust Ports Raised .375".
  • (2) 4150 Style Intake Available.
  • (3) Front or Rear Sump Available.
  • (4) Neutral Balance Flexplate/Flywheel Required.
Fuel System Components
Why Buy A Carburetor From Us?

Yes, you can certainly purchase a stock carb from the big mail order companies but we've seen carbs out of the box down on power as much as 40HP and between 15-20HP is common. That's why we disassemble and blueprint EVERY carburetor before we ever bolt it on your engine. We then tune, adjust and jet your carb on your engine so you get every ounce of power that you paid for.

Even if you're considering one of our Engine Kits or simply looking for a replacement carb, the same blueprint work is done and we dyno test it on a comparable engine to yours before it ships!
 $Priceless
APD 950 CFM 4150 Series Carb Package includes: 3 Circuit Billet Carb, Phenolic Spacer, Aluminum AN Fuel Fittings, Studs & Gaskets. Dyno Tuned, Jetted and Calibrated on your engine.Image Close$995
APD 1040 CFM 4150 Series Carb Package includes: 3 Circuit Billet Carb, Phenolic Spacer, Aluminum AN Fuel Fittings, Studs & Gaskets. Dyno Tuned, Jetted and Calibrated on your engine.Image Close$995
APD 1050 CFM 4500 Series Carb Package includes: 3 Circuit Billet Carb, Phenolic Spacer, Aluminum AN Fuel Fittings, Studs & Gaskets. Dyno Tuned, Jetted and Calibrated on your engine.Image Close$1395
APD "Black Widow" 2" SpacerImage Close$100
MagnaFuel ProStar 500 Billet Gerotor Electric Fuel PumpImage Close$430
Igniton Components
MSD Electronic Ignition Package includes MSD Pro Billet Distributor, Steel Distributor Gear, Custom Moroso Wire Set and Loom Kit. Dyno Tested and Calibrated on your engine. $695
MSD 7AL-2 Electronic Ignition Box (Direct Plug-in For Our MSD Distributors) $759
MSD 82613 HVC-2 Coil $265
Connecting Rods
ARP 2000 Rod Bolts $Included
Pistons - Pins - Rings - Bearings
Total Seal TNT "Hellfire" Rings $175
Tool Steel "Heavy Wall" Wrist Pins $250
Calico Coated Bearing Package $150
Valvetrain
T&D Shaft Rocker System $1225
Intake Manifolds
Edelbrock Super Victor Intake Manifold For 4150 Style Carburetors $N/C
Oil Pumps - Oil Pans - Vacuum Pump
Aluminum Rear Sump or Front Sump Pan $325
Additional Parts - Labor - Accessories
Cometic MLS (Multi Layered Steel) Head Gaskets $125
ATI SFI Approved Super Damper Balancer (Includes Hone To Fit Labor) $295
ATI SFI Flexplate - Internally Balanced 157 Tooth 10.5" Bolt Pattern $275
ATI SFI Flexplate - Internally Balanced 164 Tooth 11.5" Bolt Pattern $275
Steel Billet Flywheel - Internally Balanced 157 Tooth 10.5" Bolt Pattern $350
Steel Billet Flywheel - Internally Balanced 164 Tooth 11.5" Bolt Pattern $350
PowerMaster 9603 Hi-Torque Mini Starter. Fits 4.084" block plate with 3/4" depth ring gear. $229