434/735HP Small Block Chevy Drag Race Long Block
Drag Race

434/735HP Small Block Chevy Drag Race Long Block $11,295

Long Block $11,295
See Footnote (1) Below

When You Have To Watch Your Racing Budget Closely But You Don't Want To Scrimp On Any Of The Critical And Intricate Details Of Race Engine Assembly This Is The "Budget Minded" Package For You!

When Your Old Short Block And Heads Have Seen Better Days And You Need A Fresh "Heart Transplant" To Keep The Win Lights Coming This Is Your Baby. We Do All The Hard Work And You Just Finish Up The "Tin Work" And Bolt On Your Old Carb, Intake And Ignition System. These Long Blocks Are The Exact Same Configurations As Our "Sportsman Series" Race Engines. They Are Availble With Any Of The Options Or Upgrades Listed Below.

  • Bore & Stroke
  • Compression Ratio
  • 4.155 x 4.000
  • 14.25 to 1
  • Dart Little "M" Block w/4 Bolt Splayed Caps
  • SSRE/Scat 4340 4.000" Stroke Steel Crank
  • Scat 4340 6.000" H-Beam Steel Rods
  • Clevite 77 "H" Series Main & Rod Bearings
  • Wiseco 14.25 Gas Ported Pro Series Forged Pistons
  • 043/043/3MM Backcut Lightweight Ring Package
  • SSRE Custom Grind Steel Billet Roller Cam
  • Comp Cams Heavy Duty Solid Roller Lifters
  • Rollmaster Billet Timing Set w/IWIS Chain & Torrington Bearing
  • AFR 235 Eliminator Fully CNC Ported Aluminum Heads
  • 1.550" Roller Springs w/Retainers & 10° Locks
  • Machine Cylinder Heads for Pushrod Clearance
  • Correct Pushrod Length and Rocker Geometry Set
  • ARP Head Studs w/12-Point Nuts
  • Scorpion Race Series 1.6 Aluminum Roller Rockers
  • FelPro HP Head Gaskets w/Pre-Flattened Copper Wire
  • Milodon Reinforced Front Cover
  • Fully Machined and Assembled
  • Oil System Pressure Primed & Flow Checked
  • Complete Assembly Internally Balanced
  • Footnotes:
  • (1) Does Not Include: Intake Manifold, Oil Pan or Pump, Valve Covers, Harmonic Balancer or Pointer, Related Bolts, Gaskets or Dyno Session. (All Of These Parts Are Available Separately.)
Dart Steel Billet Main Cap Upgrade $450
Brodix/Dart Aluminum Block w/Special Head Stud Kit & Additional Machining
(Slightly Less Peak HP)
Manley 4340 Non-Twist Forged & Nitrided Crank $125
Connecting Rods
ARP 2000 Rod Bolts $125
Manley H-Beam 4340 Steel Rods w/ARP 2000 Bolts $300
Molnar Severe Duty 4340 H-Beam Rods w/ARP 2000 Asymmetrical Bolts $400
Pistons - Pins - Rings - Bearings
Total Seal TNT "Hellfire" Rings $175
Tool Steel "Heavy Wall" Wrist Pins $225
Calico Coated Bearing Package $150
HIPPO Severe Duty Roller Lifters w/Hi-Pressure Pin Oiling (Extended Lifter Life) $295
HIPPO Severe Duty Pressure Fed Roller Lifters w/Solid Bushed Rollers (No Needle Bearings) $595
Isky Red Zone Solid Roller Lifters w/EZX "Needle Free" Bearing Option $845
SSRE Stud Girdle w/CNC Machined 2-Piece Valvetrain Stabilizer & Locking Hex Head Adjusting Nuts $295
T&D Shaft Rocker System $1395
Needle Bearing Tip Option for T&D Shaft Rockers $295
Cloyes 2 Piece Aluminum Timing CoverImage Close$150
Jesel Belt Drive (Includes Mandatory Block Machining) $1145
Additional Parts - Labor - Accessories
Cometic MLS (Multi Layered Steel) Head Gaskets $95
SFI Heavy Duty Flexplate & ARP Bolt Package $125
JW "The Wheel" Severe Duty SFI Flex PlateImage Close$269
Boninfante SFI Billet Flexplate & ARP Bolt PackageImage Close$395
PowerMaster Hi-Torque Mini StarterImage Close$229
Meziere 55GPH Electric Water PumpImage Close$450