Less Carb & Ignition
The Most Bang For The Buck ... Our Most Popular Big Block Combination For Bracket Racing. We Have Built Literally Thousands Of These And Have Developed A Combination That Produces Great Power With Excellent Reliability.
- Cubic Inch
- Bore & Stroke
- Horsepower
- Torque
- 540
- 4.500 x 4.250
- 825 @ 6800 RPM
- 685 @ 5800 RPM
- Dart Big "M" 9.8" Low Deck Block w/4 Bolt Splayed Caps
- Eagle 4340 4.250" Stroke Steel Crank
- Eagle 4340 6.385" H-Beam 3D Steel Rods
- Clevite 77 "H" Series Main & Rod Bearings
- JE/SRP 13.5 Forged Aluminum Pistons
- Total Seal Plasma Moly Ring Set
- SSRE Custom Grind Steel Billet Roller Cam
- Comp Cams Heavy Duty Solid Roller Lifters
- Cloyes Billet True Roller Timing Set w/Torrington Bearing
- Dart "New Design" Pro 1 345 Aluminum Heads
- Manley Nextek® 1.640" Roller Springs
- Titanium Retainers & 10° Locks
- ARP Head Stud Kit w/Parallel Ground Washers
- Pro Series "Wide Body" 1.7 Aluminum Roller Rockers
- FelPro HP Head Gaskets w/Pre-Flattened Steel Wire
- Merlin X "New Design" Dominator Intake Manifold
- SSRE/Moroso Custom Stroker Oil Pan w/Windage Tray
- Moroso Race Prepped Pump w/Tig Welded HD Pickup
- GM Performance Chrome Front Cover w/Billet Pointer
- SFI Approved Harmonic Balancer
- Complete Assembly Internally Balanced
- Individually Dyno Tested & Tuned
- Actual Dyno Sheet Provided
 |
|
|
|||
| Fuel System Components: | |||||
| Why Buy A Carburetor From Us? Yes, you can certainly purchase a stock carb from the big mail order companies but we've seen carbs out of the box down on power as much as 40HP and between 15-20HP is common. That's why we disassemble and blueprint EVERY carburetor before we ever bolt it on your engine. We then tune, adjust and jet your carb on your engine so you get every once of power that you paid for. Even if you're considering one of our Engine Kits or simply looking for a replacement carb, the same blueprint work is done and we dyno test it on a comparable engine to yours before it ships! |
|
$ Priceless | |||
| 1150 CFM Holley Dominator Carb Package includes: Carb, Phenolic Spacer, Aluminum AN Fuel Fittings, Studs & Gaskets. Dyno Tuned, Jetted and Calibrated on your engine. | |
$ 995 | |||
| QuickFuel 950 CFM Carb Package includes: Carb w/Billet Metering Blocks & Throttle Body, Phenolic Spacer, Aluminum AN Fuel Fittings, Studs & Gaskets. Dyno Tuned, Jetted and Calibrated on your engine. Includes Edelbrock Super Victor Intake. | |
$ 895 | |||
MagnaFuel ProStar 500 Billet Gerotor Electric Fuel Pump |
|
$ 399 | |||
| Ignition Components: | |||||
| MSD Electronic Ignition Package includes MSD Pro Billet Locked Distributor w/Ford HEI-Style Cap, Bronze Gear, Custom MSD 8.5mm Wire Set. Dyno Tested and Calibrated on your engine. | |
$ 395 | |||
| MSD Crank Trigger Ignition Upgrade | |
$ 275 | |||
| MSD 7AL-2 Electronic Ignition Box (Direct Plug-in For Our MSD Distributors) | |
$ 559 | |||
| MSD 8201 Pro Power Coil | |
$ 116 | |||
| Short Block Components: | |||||
| Dart Steel Billet Main Cap Upgrade | |
$ 450 | |||
| Brodix/Dart Aluminum Block w/Special Head Stud Kit & Additional Machining (Slightly Less Peak HP) |
|
$ 4000 | |||
| Callies USA Made 4340 Dragonslayer Crank w/Dura-Tough Heat Treating | |
$ 495 | |||
| Eagle 4340 3D Rods w/L19 Rod Bolts | |
$ 125 | |||
| Manley H-Beam 4340 Steel Rods w/ARP 2000 Bolts | |
$ 300 | |||
|
|||||
| Cometic MLS (Multi Layered Steel) Head Gaskets | |
$ 95 | |||
| Calico Coated Bearing Package (Cam, Rods & Mains) | |
$ 150 | |||
| ATI SFI Approved Super Damper Balancer | |
$ 225 | |||
| Dart Inner Valley Stud Kit (Improved Head Gasket Sealing) | |
$ 95 | |||
| Pistons/Pins/Rings: | |||||
| Wiseco 14.5 Pro Series Piston & 6.535" Rod Package | |
$ 200 | |||
| Tool Steel Rings for Nitrous | |
$ 250 | |||
| Tool Steel "Heavy Wall" Wrist Pins | |
$ 200 | |||
| Valvetrain Components: | |||||
| Isky Red Zone Roller Lifters w/Hi-Pressure Pin Oiling (Extended Lifter Life) | |
$ 295 | |||
| Isky Red Zone Roller Lifters w/EZX "Needle Free" Bearing Option | |
$ 595 | |||
| 1.645" Pacaloy® Triple Valve Spring Upgrade | |
$ 175 | |||
| SSRE Stud Girdle w/CNC Machined 2-Piece Valvetrain Stabilizer & Locking Hex Head Adjusting Nuts | |
$ 250 | |||
| T&D 1.70 Ratio Shaft Rocker System | |
$ 1295 | |||
| Jesel Belt Drive | |
$ 995 | |||
New For 2009! Jesel "Solid One Piece" Belt Drive |
|
$ 795 | |||
| Intake Manifolds/Nitrous Systems: | |||||
| Edelbrock Super Victor Intake Manifold For 4150 Style Carburetors | |
N/C | |||
| SpeedTech Liquid Force "Fogger Style" Nitrous System - Plumbed & Installed | |
$ 1500 | |||
| Oil Pumps/Oil Pans: | |||||
Moroso HD Billet Aluminum Oil Pump |
|
$ 295 | |||
| Moroso Kickout Style Pro Pan w/Solid Louvered Tray & Main Cap Partitions For Added Power & Oil Control | |
$ 200 | |||
| Moroso Aluminum Pro Eliminator Pan | |
$ 495 | |||
| Endurance Options: | |||||
| Callies USA Made 4340 Dragonslayer Crank w/Dura-Tough Heat Treating | |
$ 495 | |||
| Manley H-Beam 4340 Steel Rods w/ARP 2000 Bolts | |
$ 300 | |||
| Calico Coated Bearing Package (Cam, Rods & Mains) | |
$ 150 | |||
| Isky Red Zone Roller Lifters w/Hi-Pressure Pin Oiling (Extended Lifter Life) | |
$ 295 | |||
| Cometic MLS (Multi Layered Steel) Head Gaskets | |
$ 95 | |||
| Dart Inner Valley Stud Kit (Improved Head Gasket Sealing) | |
$ 95 | |||
|
|||||
| Nitrous Package (300+ HP Shot): | |||||
| Callies USA Made 4340 Dragonslayer Crank w/Dura-Tough Heat Treating | |
$ 495 | |||
| Manley H-Beam 4340 Steel Rods w/ARP 2000 Bolts | |
$ 300 | |||
| Tool Steel Rings for Nitrous | |
$ 250 | |||
| Tool Steel "Heavy Wall" Wrist Pins | |
$ 200 | |||
| Calico Coated Bearing Package (Cam, Rods & Mains) | |
$ 150 | |||
| Isky Red Zone Roller Lifters w/Hi-Pressure Pin Oiling (Extended Lifter Life) | |
$ 295 | |||
| Cometic MLS (Multi Layered Steel) Head Gaskets | |
$ 95 | |||
| Dart Inner Valley Stud Kit (Improved Head Gasket Sealing) | |
$ 95 | |||
|
|||||
| Accessories: | |||||
SSRE Engraved Sheet Metal Valve Covers w/AN-12 Welded Bung |
|
$ 370 | |||
Meziere 55GPH Electric Water Pump |
|
$ 375 | |||
PowerMaster Hi-Torque Mini Starter |
|
$ 229 | |||
| SFI Heavy Duty Flex Plate & ARP Bolt Package | |
$ 125 | |||
JW "The Wheel" Severe Duty SFI Flex Plate |
|
$ 180 | |||
Meziere "Ten Pitch" 2.2KW Starter w/Super Duty Drive (Requires FPT300 "Ten Pitch" Flexplate) |
|
$ 525 | |||
Meziere "Ten Pitch" True Billet 139 Tooth SFI Flexplate (Requires TST400 "Ten Pitch" Starter) |
|
$ 357 | |||
| MagnaFuel ProStar 500 Billet Gerotor Electric Fuel Pump |
|
$ 399 | |||
| SpeedTech Diffuser Plate Nitrous System - Installed | |
$ 730 | |||
| SpeedTech Liquid Force "Fogger Style" Nitrous System - Plumbed & Installed | |
$ 1500 | |||
| Moroso Vacuum Pump Kit w/Adjustable Relief Valve (Installed) | |
$ 895 | |||
| PowerMaster XS Power AGM 16 Volt Battery (Only 33 lbs!) | |
$ 249 | |||
| PowerMaster PWM-1005 16 Volt Battery Charger | |
$ 299 | |||
SSRE Pro Series Polished Aluminum Valve Covers w/Engraved & Painted Logo |
|
$ 95 | |||
Custom Locking & Calibrated Dipstick |
|
$ 95 | |||
| Joe Gibbs XP4 15W50 Racing Oil (12 Quart Case) | |
$ 72 | |||
Components Subject To Change Due To Availability.
Free Freight Applies To All Advertised Items Shipped To A Commercial Address In The 48 States. Residential, Out-Of-Area Or Lift Gate Service Subject To Additional Charges. Insurance & Handling Fees Apply.
Toll Free: 800.295.7142 • Phone: 631.218.7530 • FAX: 631.218.7540 • Email: ssre123@aol.com
35 Davinci Drive • Bohemia, NY 11716
HOURS: Mon - Thu 9:00 a.m. - 6:00 p.m. Friday 9:00 a.m. - 3:00 p.m. EST
A Division Of Scott Shafiroff Race Engines & Components © 2000-2010 All Rights Reserved