Includes Carb & Ignition
New Combination!
When "Too Much Is Just Enough" Our New 632 12° Bullit Fills The Bill. Incredible 1200 Plus Horsepower With Single Carb Simplicity And Still User Friendly With A Single Stage Of Nitrous.
- Cubic Inch
- Bore & Stroke
- Horsepower
- Torque
- 632
- 4.600 x 4.750
- 1225 @ 7300 RPM
- 925 @ 6200 RPM
- Dart Big "M" Tall Deck Block w/Splayed Caps
- Callies 4.750" Stroke Magnum Plus® Crank
- Oliver Steel Billet 6.700" Rods
- Clevite 77 "H" Series Main & Rod Bearings
- SSRE/Diamond 15-1 Custom Gas Ported Pistons w/UltraLite® Ring Set
- SSRE 54mm Large Core 7/4 Swap Billet Roller Cam
- Pro Series .904" Solid Roller Lifters w/Hi-Pressure Pin Oiling
- Cloyes Billet Timing Set w/Torrington Bearing
- SSRE/Brodix PB1204 12° Fully CNC Ported Heads
- Titanium 2.475" Intake & 1.860" Exhaust Valves
- NexTek 1.670" Triple Springs w/Titanium Retainers & 10° Locks
- ARP Head Stud Kit w/Parallel Ground Washers
- T&D Pro Series "1 Piece Stand" Shaft Rockers
- 7/16" Super Duty Pushrods
- Cometic MLS Head Gaskets
- Dart Inner Valley Stud Kit
- Brodix "Big Mouth" Single Dominator Intake
- SSRE/Moroso Pro Eliminator Oil Pan
- Moroso Race Prepped Pump w/Tig Welded HD Pickup
- ATI Super Damper
- Holley 1250 Dominator HP Carb w/SSRE Calibration
- MSD Electronic Ignition w/Moroso Shielded Wires
- Custom Engraved Sheet Metal Valve Covers
- Complete Assembly Internally Balanced
- Individually Dyno Tested & Tuned
- Actual Dyno Sheet Provided
 |
|
|
| Fuel System Components: | ||
| Holley Dominator Carb Package includes: Carb, Phenolic Spacer, Aluminum AN Fuel Fittings, Studs & Gaskets. Dyno Tuned, Jetted and Calibrated on your engine. | |
Included |
MagnaFuel ProStar 500 Billet Gerotor Electric Fuel Pump |
|
$ 399 |
| Ignition Components: | ||
| MSD Electronic Ignition Package includes MSD Pro Billet Locked Distributor w/Ford HEI-Style Cap, Bronze Gear, Custom MSD 8.5mm Wire Set. Dyno Tested and Calibrated on your engine. | |
Included |
| MSD Crank Trigger Ignition Upgrade | |
$ 275 |
| Short Block Components: | ||
| Brodix/Dart Aluminum Block w/Special Head Stud Kit & Additional Machining (Slightly Less Peak HP) |
|
$ 3500 |
| Calico Coated Bearing Package (Cam, Rods & Mains) | |
$ 150 |
| Pistons/Pins/Rings: | ||
| Hellfire® Rings | |
$ 175 |
| Tool Steel Rings for Nitrous | |
$ 350 |
| Tool Steel "Heavy Wall" Wrist Pins | |
$ 200 |
| Valvetrain/Timing Components: | ||
| Isky Red Zone Roller Lifters w/EZX "Needle Free" Bearing Option | |
$ 295 |
| Intake Manifolds/Nitrous Systems: | ||
| SpeedTech Diffuser Plate Nitrous System - Installed | |
$ 730 |
| SpeedTech Liquid Force "Fogger Style" Nitrous System - Plumbed & Installed | |
$ 1500 |
| Oil Pumps/Oil Pans/Vacuum Pumps: | ||
| Moroso Aluminum Pro Eliminator Pan | |
$ 295 |
| Moroso Four Stage Dry Sump Oil System | |
$ 3500 |
| Moroso Vacuum Pump Kit w/Adjustable Relief Valve (Installed) | |
$ 975 |
| Accessories: | ||
Meziere 55GPH Electric Water Pump |
|
$ 375 |
PowerMaster Hi-Torque Mini Starter |
|
$ 229 |
JW "The Wheel" Severe Duty SFI Flex Plate |
|
$ 200 |
Meziere "Ten Pitch" 2.2KW Starter w/Super Duty Drive (Requires FPT300 "Ten Pitch" Flexplate) |
|
$ 525 |
Meziere "Ten Pitch" True Billet 139 Tooth SFI Flexplate (Requires TST400 "Ten Pitch" Starter) |
|
$ 357 |
| PowerMaster XS Power AGM 16 Volt Battery (Only 33 lbs!) | |
$ 249 |
| PowerMaster PWM-1005 16 Volt Battery Charger | |
$ 299 |
Custom Locking & Calibrated Dipstick |
|
$ 95 |
SSRE Engraved Sheet Metal Valve Covers w/AN-12 Welded Bung |
|
$ 370 |
Components Subject To Change Due To Availability.
Free Freight Applies To All Advertised Items Shipped To A Commercial Address In The 48 States. Residential, Out-Of-Area Or Lift Gate Service Subject To Additional Charges. Insurance & Handling Fees Apply.
Toll Free: 800.295.7142 • Phone: 631.218.7530 • FAX: 631.218.7540 • Email: ssre123@aol.com
35 Davinci Drive • Bohemia, NY 11716
HOURS: Mon - Thu 9:00 a.m. - 6:00 p.m. Friday 9:00 a.m. - 3:00 p.m. EST
A Division Of Scott Shafiroff Race Engines & Components © 2000-2011 All Rights Reserved