Shafiroff Racing Drag Race Engines
598/1065HP $18,250
Includes Carb & Ignition

9.8" Low Deck Block

Ultra Trick APD 1250 Carb & Black Widow Spacer STANDARD

New For '09. This Low Deck Monster Packs Almost 600 Cubic Inches In A Light And Compact Design. It's Broad Torque Curve Puts Out Over 850 lbs/ft And Is Ideally Suited For Heavier Vehicles Or When You Just Have To Have The Biggest Low Deck Available!

  • Cubic Inch
  • Bore & Stroke
  • Horsepower
  • Torque
  • 598
  • 4.600 x 4.500
  • 1065 @ 7100 RPM
  • 855 @ 5800 RPM

  • Dart Big "M" 9.8" Low Deck Block w/4 Bolt Splayed Caps
  • Manley 4340 Non-Twist 4.500" Stroke Steel Crank
  • Manley 6500 Series H-Beam Rods
  • Clevite 77 "H" Series Main & Rod Bearings
  • Wiseco 15-1 Gas Ported Pistons w/.043 Rings
  • Total Seal Plasma Moly Ring Set
  • SSRE Custom Grind 7/4 Swap Billet Roller Cam
  • HIPPO Pro Series Roller Lifters w/Hi-Pressure Pin Oiling
  • Cloyes Billet True Roller Timing Set w/Torrington Bearing
  • Brodix 383 Head Hunter Fully CNC Ported Oval Port Heads
  • PAC Racing 1248 Triple Springs
  • Titanium Retainers & 10° Locks
  • ARP Head Stud Kit w/Parallel Ground Washers
  • T&D Shaft Rockers
  • Cometic MLS Head Gaskets
  • Dart Inner Valley Stud Kit
  • Brodix BM2017 SuperMod Ported Intake
  • SSRE/Moroso Pro Eliminator Oil Pan w/Windage Tray
  • Moroso Winged Design Race Prepped Oil Pump
  • GM Performance Chrome Front Cover w/Billet Pointer
  • ATI Super Damper
  • APD 1250 4500 Carb & Black Widow Spacer
  • MSD Electronic Ignition w/Moroso Shielded Wires
  • Complete Assembly Internally Balanced
  • Individually Dyno Tested & Tuned
  • Actual Dyno Sheet Provided
Nitrous Package$1295

Planning On Adding Heavy Nitrous? We've Put Together A Preferred Option Package Of Our Most Popular And Highly Recommended Heavy Duty Components ... With The Added Bonus Of Savings!!


●  Tool Steel "M2" Rings for Heavy Nitrous$350
●  Tool Steel "Heavy Wall" Wrist Pins$225
●  Calico Coated Bearing Package$150
●  HIPPO Severe Duty Pressure Fed Roller Lifters w/Solid Bushed Rollers (No Needle Bearings)$595
●  MSD Crank Trigger Ignition Upgrade$295
●  Slightly Lower Compression Ratio$75

Total Package Value = $1690 - Save $395!

Savings Include $295 Component Credit
Fuel System Components:
Why Buy A Carburetor From Us?

Yes, you can certainly purchase a stock carb from the big mail order companies but we've seen carbs out of the box down on power as much as 40HP and between 15-20HP is common. That's why we disassemble and blueprint EVERY carburetor before we ever bolt it on your engine. We then tune, adjust and jet your carb on your engine so you get every ounce of power that you paid for.

Even if you're considering one of our Engine Kits or simply looking for a replacement carb, the same blueprint work is done and we dyno test it on a comparable engine to yours before it ships!
$Priceless
APD 1250 CFM 4500 Series Carb Package includes: Carb, APD Black Widow Spacer, Aluminum AN Fuel Fittings, Studs & Gaskets. Dyno Tuned, Jetted and Calibrated on your engine.$Included
MagnaFuel ProStar 500 Billet Gerotor Electric Fuel Pump$399
Igniton Components:
MSD Electronic Ignition Package includes MSD Pro Billet Locked Distributor w/Ford HEI-Style Cap, Bronze Gear, Custom MSD 8.5mm Wire Set. Dyno Tested and Calibrated on your engine.$Included
MSD Crank Trigger Ignition Upgrade$295
Blocks:
Dart Steel Billet Main Cap Upgrade$450
Brodix/Dart Aluminum Block w/Special Head Stud Kit & Additional Machining
(Slightly Less Peak HP)
$4000
Connecting Rods:
Callies Ultra I-Beam 4330M Timken Steel Rods$1095
Oliver Steel Billet Rods$1095
Pistons - Pins - Rings - Bearings:
Hellfire® Rings$175
Tool Steel "M2" Rings for Heavy Nitrous$350
Tool Steel "Heavy Wall" Wrist Pins$225
Calico Coated Bearing Package$150
Lifters:
HIPPO Severe Duty Pressure Fed Roller Lifters w/Solid Bushed Rollers (No Needle Bearings)$300
$295 credit applied
Isky Red Zone Solid Roller Lifters w/EZX "Needle Free" Bearing Option$500
$295 credit applied
Valvetrain:
Needle Bearing Tip Option for T&D Shaft Rockers$240
Timing:
Jesel "Solid One Piece" Belt Drive$895
Jesel "Original 2 pc" Belt Drive$1045
Nitrous Systems:
SpeedTech Diffuser Plate Nitrous System - Installed$795
SpeedTech Liquid Force "Fogger Style" Nitrous System - Plumbed & Installed$1500
Oil Pumps - Oil Pans:
Moroso HD Billet Aluminum Oil Pump$295
Additional Parts - Labor - Accessories:
Moroso Vacuum Pump Kit w/Adjustable Relief Valve (Installed)$975
SFI Heavy Duty Flexplate & ARP Bolt Package$125
JW "The Wheel" Severe Duty SFI Flex Plate$225
PowerMaster Hi-Torque Mini Starter$229
Meziere 55GPH Electric Water Pump$450
SSRE Engraved Sheet Metal Valve Covers$300
$50 credit applied
Show Quality Polished Chrome Plated Finish For Sheet Metal Valve CoversAdditional$275