Our New 582 Nitrous Special - Finally, A 582 With A Real Nitrous Piston. Designed For Consistent, Reliable And Affordable Racing. Comes Standard With All Of The Hardcore Parts That Make This The Most Reliable Low Deck BBC Nitrous Engine On The Market.
Built By The Company That Started It All!!
- Cubic Inch
- Bore & Stroke
- Horsepower
- 582
- 4.600 x 4.375
- 1500 @ 7200 RPM
- Single Stage NOS
- Dart Big "M" 9.8" Low Deck Block w/Splayed Caps
- O-Ringed Block w/Copper Head Gaskets
- Callies 4340 Magnum Plus® 4.375" Stroke Crank
- Oliver Severe Duty Steel Billet Rods
- Clevite 77 "H" Series Main & Rod Bearings
- Wiseco 1.120" 14-1 Severe Duty Gas Ported Nitrous Pistons
- Tool Steel Nitrous Rings
- SSRE Custom 7/4 Swap Nitrous Billet Roller Cam
- Severe Duty "HIPPO" Solid Roller Lifters
- Cloyes Billet True Roller Timing Set w/Torrington Bearing
- Brodix 383 Head Hunter Fully Ported Oval Port Heads
- PAC Racing 1248 Triple Springs
- Titanium Retainers & 10° Locks
- ARP Head Stud Kit w/Parallel Ground Washers
- T&D Shaft Rockers
- Dart Inner Valley Head Studs
- Brodix BM2017 SuperMod Ported Intake
- SPEEDTECH Single Stage Diffuser Plate Nitrous System
- SSRE/Moroso Pro Eliminator Oil Pan w/Windage Tray
- Moroso Race Prepped Pump w/Tig Welded HD Pickup
- ATI Super Damper
- Holley 1250 Dominator HP Carb w/SSRE Calibration
- MSD Crank Trigger Ignition w/Moroso Shielded Wires
- Custom SSRE Polished Aluminum Valve Covers
- Complete Assembly Internally Balanced
- Individually Dyno Tested & Tuned
- Actual Dyno Sheet Provided
 |
|
|
| Fuel System Components: | ||
| Holley Dominator Carb Package includes: Carb, Phenolic Spacer, Aluminum AN Fuel Fittings, Studs & Gaskets. Dyno Tuned, Jetted and Calibrated on your engine. | |
Included |
| Ignition Components: | ||
| MSD Electronic Ignition Package includes MSD Pro Billet Locked Distributor w/Ford HEI-Style Cap, Bronze Gear, Custom MSD 8.5mm Wire Set. Dyno Tested and Calibrated on your engine. | |
Included |
| Short Block Options: | ||
| Special "Nitrous Prepped" Brodix/Dart Aluminum Block | |
$ 3500 |
| GRP Aluminum Rods (Includes Required Block Machining And Crank Balancing) | |
$ 295 |
| Calico Coated Bearing Package (Cam, Rods & Mains) | |
$ 150 |
| Pistons/Pins/Rings: | ||
| Tool Steel 200 Straight Wall Wrist Pins | |
$ 200 |
| Valvetrain/Timing Components: | ||
| Isky Red Zone Roller Lifters w/EZX "Needle Free" Bearing Option | |
$ 295 |
| Jesel Belt Drive | |
$ 995 |
| Intake Manifolds/Nitrous Systems: | ||
| SpeedTech Liquid Force "Fogger Style" Nitrous System - Plumbed & Installed (* This Replaces The Plate System) | |
$ 1000 |
| Oil Pumps/Oil Pans/Vacuum Pumps: | ||
Moroso HD Billet Aluminum Oil Pump |
|
$ 295 |
| Moroso Four Stage Dry Sump Oil System | |
$ 3500 |
| Moroso Vacuum Pump Kit w/Adjustable Relief Valve (Installed) | |
$ 975 |
| Accessories: | ||
Meziere 55GPH Electric Water Pump |
|
$ 375 |
PowerMaster Hi-Torque Mini Starter |
|
$ 229 |
JW "The Wheel" Severe Duty SFI Flex Plate |
|
$ 200 |
Meziere "Ten Pitch" 2.2KW Starter w/Super Duty Drive (Requires FPT300 "Ten Pitch" Flexplate) |
|
$ 525 |
Meziere "Ten Pitch" True Billet 139 Tooth SFI Flexplate (Requires TST400 "Ten Pitch" Starter) |
|
$ 357 |
| PowerMaster XS Power AGM 16 Volt Battery (Only 33 lbs!) | |
$ 249 |
| PowerMaster PWM-1005 16 Volt Battery Charger | |
$ 299 |
Custom Locking & Calibrated Dipstick |
|
$ 95 |
SSRE Engraved Sheet Metal Valve Covers w/AN-12 Welded Bung |
|
$ 370 |
Components Subject To Change Due To Availability.
Free Freight Applies To All Advertised Items Shipped To A Commercial Address In The 48 States. Residential, Out-Of-Area Or Lift Gate Service Subject To Additional Charges. Insurance & Handling Fees Apply.
Toll Free: 800.295.7142 • Phone: 631.218.7530 • FAX: 631.218.7540 • Email: ssre123@aol.com
35 Davinci Drive • Bohemia, NY 11716
HOURS: Mon - Thu 9:00 a.m. - 6:00 p.m. Friday 9:00 a.m. - 3:00 p.m. EST
A Division Of Scott Shafiroff Race Engines & Components © 2000-2011 All Rights Reserved