540 Big Block Chevy Fast EFI Pump Gas Engine

540 Big Block Chevy Fast EFI Pump Gas Engine

540/625HP $
includes EZ-EFI* & MSD Ignition
*Modified For Higher Horsepower

Finally A True Drop In Turnkey Fuel Injection Engine That Doesn't Require A Laptop Or A Degree In Rocket Science To Reap The Benefits Of A Proprly Designed And Tuned Fuel Injected System!

  • Horsepower
  • Torque
  • Bore & Stroke
  • Compression Ratio
  • Fuel Requirement

  • Dart Big "M" 9.8" Block w/4 Bolt Splayed Caps
  • SSRE/Scat 4340 4.250" Stroke Steel Crank (1)
  • Scat 4340 6.385" I-Beam Steel Rods w/ARP Bolts
  • Clevite 77 "H" Series Main & Rod Bearings
  • Custom 9.75-1 Forged Aluminum Pistons
  • Plasma Moly Ring Set
  • Comp Cams Hydraulic Roller Camshaft (2)
  • Hydraulic Roller Lifters w/Vertical Bar
  • Rollmaster Billet Timing Set w/IWIS Chain & Torrington Bearing
  • Brodix RaceRite BB2+ 320cc Heads w/Std. Height Ex Ports
  • 2.250"/1.880" Stainless Steel Valves
  • 1.530" Hydraulic Roller Springs & 10° Steel Retainers
  • Manley Chromemoly Head Bolts & Heat Treated Washers
  • Comp Cams 1.7 Ultra Pro Magnum Roller Rockers
  • Chromemoly (1) Piece .080" Wall Pushrods
  • FelPro HP Head Gaskets w/Pre-Flattened Steel Wire
  • Edelbrock "Air Gap RPM" Dual Plane Intake
  • Moroso Street/Strip Oil Pan
  • Melling Race Prepped Oil Pump w/Tig Welded HD Pickup
  • GM Performance Chrome Front Cover w/Billet Timing Pointer
  • Hi-Performance Harmonic Balancer
  • Fully Mapped & Calibrated EZ-EFI Fuel Injection
  • Custom Calibrated EFI Compatible MSD Distributor
  • Complete Assembly Internally Balanced
  • Individually Dyno Tested & Tuned
  • Actual Dyno Sheet Provided
"HHR" Hot Hydraulic Roller $

For Those That Want Even More Power The HHR Is For You! We Use Special "Proprietary Grinds" On Our Custom Hot Hydraulic Roller Cam Along With "Ultra Hi-Rev" Hydraulic Roller Lifters. This Version Also Comes Standard w/CNC Ported Combustion Chambers And Premium Alloy Valve Springs To Maintain Race Engine Performance With Hydraulic Roller Convenience.

  • Dart Pro 1 325cc Aluminum Heads w/CNC Ported Chambers
  • Comp Cams Custom "Proprietary Grind" Hydraulic Roller Cam
  • High Rev Hydraulic Roller Lifters
  • Isky "Enduro Design" Premium Valve Spring Package
  • Horsepower
  • Torque
  • Compression Ratio
  • Fuel Requirement
Fuel System Components
EZ-EFI Fuel Pump Kit
Includes: Inline Electric EFI Fuel Pump, 600 HP Adjustable Fuel Pressure Regulator, Fuel Pressure Gauge, Billet Fuel Filter (Re-usable), Relay Harness (Plug & Play for EZ-EFI), (1) 6AN to 6AN Female Coupler (Filter to Fuel Pump), (2) 6AN to O-Ring 6AN Straight Fitting (Regular In/Out). Price includes labor to set required fuel pressure.
Image Close$365
EZ-EFI Fuel Line Kit
Includes: 25 Feet of Push Lock #6 Hose, (3) 6AN Push On Straight Fittings (Black), (2) 6AN Push On 90 ° Fittings (Black), (3) Gator 1/2" Clamps.
Aeromotive Phantom In-Tank Electric Fuel Pump Includes: In-Tank Fuel Pump, Black Anodized Hanger Assembly, Internal Baffling System. (Uses -6AN Fittings and Requires Return Style Fuel System). Rated for up to 750HP.Image Close$439
Aeromotive Phantom In-Tank Electric Fuel Pump Includes: In-Tank Fuel Pump, Black Anodized Hanger Assembly, Internal Baffling System. (Uses -6AN Fittings and Requires Return Style Fuel System). Rated for up to 1000HP.Image Close$549
Race Gas Fuel Additave - "Pump Gas Without The Detonation". Available by the quart or the case. Mixing 1 oz. per gallon will yield 2 full octane points.Image Close$Call
FiTech Fuel Injection SystemImage Close$Call
Igniton Components
MSD 6AL Digital Electronic Ignition Box w/Hi-Speed Rev Limiter $245
MSD 6AL-2 Digital Electronic Ignition Box w/Launch Control & Hi-Speed Rev Limiter $282
MSD Blaster 3 Hi Performance Ignition Coil w/HEI Style Post $49
Composite Distributor Gear (if required)Image Close$125
Cloyes 2 Piece Aluminum Timing CoverImage Close$175
Intake Manifolds
EnduraShine Intake Finish w/ARP Stainless Steel Hardware (Edelbrock Intakes Only) $225
Oil Pumps - Oil Pans - Vacuum Pump
Lokar Custom Locking & Calibrated Dipstick (Upgrade)Image Close$95
Additional Parts - Labor - Accessories
SFI Approved Harmonic Balancer (Required At All Race Tracks) $150
SFI Heavy Duty Flexplate & ARP Bolt Package $125
JW "The Wheel" Severe Duty SFI Flex PlateImage Close$269
PowerMaster Hi-Torque Mini StarterImage Close$229
Painless Performance Hot Shot Relay Kit (Recommended for above starter) $39
Edelbrock Aluminum "High Volume" Mechanical Water Pump (Short or Long Version)Image Close$250
Meziere 55GPH Electric Water PumpImage Close$450
Billet Specialties Tru Trac Serpentine SystemImage Close$Call
Billet Specialties V-Track Pulley SystemImage Close$Call
Custom Powder Coating Packages Available $Call
SSRE Engraved Sheet Metal Valve Covers w/BreathersImage Close$350
Show Quality Polished Chrome Plated Finish For Sheet Metal Valve Covers (Additional Charge)Image Close$Call